- Home

3 easy ways to make curtain panels for home

Made-to-measure home curtains panels can also provide a solution for irregularly sized windows that won’t fit typical curtain sizes. You don’t need to know how to sew to create these because they are very easy to make! Simple panels may be created using only iron-on trim tape and texturing. Making your own window curtain panels provides you the freedom to select the textures and colours that you want.

Curtain Panels – Simple

The curtain should be a few crawls away from your window. They may be as long as your window or somewhat longer; they may even reach the ground. To get you started, consider these fundamental shade lengths:

For a traditional lounge area, floor-length window decorations are ideal.

For a family room or lounge, curtains that touch and pool on the floor work fantastically.

For the kitchen, curtains that reach the ledge or fall just below it are appropriate.

Cut your texture, wash it, and dry and iron it. Expelling any starches and contracting from your texture will be aided by washing and drying it. By pressing your texture, you may get rid of creases and start with a flat surface.

To perform the repairs, double-overlay the side stitches down. In order to avoid being confronted by an improper side, turn the texture. With an iron, score the long edges at a depth of about one inch. Press them level once again after overlapping them by about another inch.

Upright sew the repairs. Pull the sewing pins out as you go and stitch as close to the inside, crumpled edge as you can.

Panels of lined curtains

Decide how long and how broad your curtains should be. The blinds should extend outward from your window a few feet on either side. They may fall directly to your window, just past it, or even all the way to the ground.

For your panels, use a respectable, developed texture, and for your covering, choose a simple, slim texture. In the upholstery section of your local texture store, you may find incredible texture. A remarkable choice for the covering is plain, white or greyish cotton.

Cut the coating and curtain textures. To remedy the issue, double-overlay the curtain texture’s side borders.

Under the fixings, fold the covering. Make sure the coating is sized appropriately for your window decoration. Next, set it straight down on top of your window decoration board. Put sewing pins through the rough edges and fold them below the seams. From within the collapsed edges, topstitch the repairs down. Twice rip the blind’s base seam.

Bed sheet panels for draping

Select a bed sheet that is either large size or twin size. You will each receive a window decoration board when you share a bed sheet. Although full-size curtains may be necessary if you require additional full-length ones, twin size bed sheets are ideal.

Any contracting will be removed by washing and drying the bed sheet, and at the same time, resolving it will provide you a smooth shooting surface.

Cut the bed sheet lengthwise in the middle. Spreading the bed sheet out on the floor and then folding it in half lengthwise would be the easiest method to accomplish this. To create the stitches, twice overlap the rough edges.

As closely as you can to the edge that has collapsed, topstitch the repairs down.

Make a note on the curtain where you need to cut it after measuring it.

When the curtain is down, cut directly over the base using the impressions you produced as a guide.

To sew the curtain, twice overlap the curtain base.

About Jeffery Brown

Read All Posts By Jeffery Brown